DashCommand - OBD-II Gauges

DashCommand - OBD-II Gauges

By Auto Meter Products, Inc.

  • Category: Sports
  • Release Date: 2009-07-15
  • Current Version: 4.8.2
  • Adult Rating: 4+
  • File Size: 48.93 MB
  • Developer: Auto Meter Products, Inc.
  • Compatibility: Requires iOS 9.0 or later.
Score: 4
From 2,063 Ratings


Transform your Apple iOS device into a customizable display and monitoring system. DashCommand puts you in control - Monitor and data log engine and vehicle performance, fuel economy, and instantly read and clear troublesome check engine lights, all with the easy to use DashCommand app. Now with improved menu design and back button! --- SEMA Show 1st runner-up for best mobile electronics product. --- Four time SEMA Global Media Award winner! Watch a video on DashCommand: https://www.youtube.com/watch?v=y12tbLmf_J0 DISCLAIMER: DashCommand requires a compatible third party hardware interface, purchased separately, to communicate with the vehicle. DashCommand supports all OBD-II and EOBD compliant vehicles sold worldwide. Please verify that your vehicle is OBD-II/EOBD compliant before purchasing! OBD-II Hardware compatibility: - Auto Meter DashLink - PLX Kiwi 3 and Kiwi 4 - OBDLink MX+ - ELM compatible WiFi - GoPoint BT1 For more info see: http://palmerperformance.com/hardware ----------------------------------- Get the benefit of multiple gauges without the overwhelming clutter and the expense! (Note: Not all OBD-II compliant vehicles will have support for all of these parameters) Performance gauges: - engine speed - corrected vehicle speed - open/closed loop - boost/vacuum combo gauge - acceleration (and braking) - torque Fuel economy gauges: - inst. fuel economy - avg fuel economy - avg fuel economy over 3 time periods - distance to empty - time to empty - fuel level % - fuel remaining in tank - fuel flow rate gauge Engine gauges: - timing (spark advance) - engine coolant temp. - intake air temp. - ambient air temp. - manifold absolute pressure - mass air flow - fuel trims, short and long term - percent engine load - catalyst temp. - fuel pressure - lambda gauge - air/fuel ratio DashCommand also contains a sophisticated trip computer that maintains stats for up to 5 trips. - distance travelled - fuel consumed - avg fuel economy - fuel cost - elapsed time - drive time - average carbon dioxide emission rate - total carbon dioxide emission - start date & time - number of fillups - avg fuel flow rate - avg driving speed - avg trip speed - avg boost/vacuum - avg engine speed - max acceleration - max engine power and torque at wheels - number of stops - max fuel flow rate - max speed - idle time - max boost/vacuum - max engine speed - max braking acceleration - max engine torque - % distance travelled while not in gear - % distance travelled in each gear - % distance travelled in non-optimal gear - % time spent while not in gear - % time spent in each gear - % time spent while in a non-optimal gear Emissions Testing: - Read and clear diagnostic trouble codes - IM Readiness status Additional Features: - Professional skidpad showing lateral and accel/braking Gs with min/max indicators - Race track visually maps out your location, acceleration and braking as you drive laps around the track allows you to visually analyze different race track laps to see how acceleration and braking changed from lap to lap thus helping you to improve your lap times on your next outing. - Inclinometer shows rolling angle and vehicle pitch for off-roading. - Support for OBD-II diagnostics. Find out why your check-engine light is on and clear diagnostic trouble codes (DTCs) - Data logging, record and playback log files showing OBD-II and acceleration data Also compatible with the Pioneer AppRadio Manufacturer-specific data is available for select vehicles, through In-App purchase. ----------------------------------- Visit the DashCommand product page for more info: https://www.palmerperformance.com/products/dashcommand/iphone/index.php



  • #1 Solution for P codes!

    By I Smell Rain
    Bought the Go Point ODB reader to track mileage since my speedo is off %10. Loaded DashCommand, downloaded the extra large heads up speedometer 3” font. Works perfectly. Now for the best part: Driving in the mountains and check engine light. Plug in the Centech Harbor Freight Diag and floundered through an hour of arrow up arrow over waste of time. Never showed a P code. Within 5 seconds, CMD, IOS app, one finger, Done!! P0741 Torque Converter lockout issue. I had the car loaded with people and a ton of gear and a clear warning to go easy on this older trans or risk limp mode. Thank you for an extraordinary tool, Brian Y.
  • Worth every penny!

    By luisv1989
    This is awesome! You can monitor a lot of important information in real time. 0-60 and 1/4 mile timers are great.. Horsepower/torque readings in real time! Well done!
  • Very useful and usable

    By Rapidlab
    The only one of many obd2 apps that I’ve been able to get to work with an inexpensive Bluetooth adapter from amazon.
  • great monitor

    By Mikrotransynergy
    use it for live fuel trim data
  • Dash command

    By dlblan85
    Love this app when it’s working, had to wait a little bit for an update to be available a few weeks ago but still prefer this for live feed and diagnostics.
  • Worth it

    By H20isay
    I’ve been stranded at a park. Truck idling rough. Stuck it in got the code. Went to the parts store and got a purge solenoid like the ap told me and fixed it within 15 minutes. Cleared the codes by way of the ap and have been riding every since. DashCmd works
  • Good app.

    By Smoke_33
    It’s been useful for monitoring a new motor. Wish I could graph data.
  • Great App for old cars

    By JimVol
    I have been a die hard advocate of this App for years. But, we recently upgraded our vehicles and I had to manually input the cars. A 2016 Ford Fusion and a 2015 Lincoln MKC. So, now I have PID'S I've paid for in the past that will not work with these cars because Dash Command doesn't even know that these are Fords. Off to figure out another way to monitor Transmission Temps on my vehicles. Come on Palmer...up your game please.
  • Works for me!

    By Michael 555555
    I purchased this app because I needed to check the cmpret on my 1997 Chevrolet truck. You do need to purchase the extra pid group to read it, but it works. The only problem I've run in to is if you go to the gauge page and swipe left or right to see other gauges, you can't get back to dashboard without force closing the app and reopening it. Decent app, though!
  • Still Hurts

    By FredKnox
    I bought the app. Provides good info that is better than my code reader. But my back still hurts when I work on my vehicle. Any good apps for a 58 year old patched up back would be great!!